=====================  Product Identification  =====================

Product ID:ATLASTACRETE E RESIN PART A, 0572304
MSDS Date:07/16/1991
FSC:8040
NIIN:00N037517
Kit Part:Y
MSDS Number: BQVTG
=== Responsible Party ===
Company Name:ATLAS MINERALS & CHEMICALS INC
Address:FARMINGTON RD
Box:0038
City:MERTZTOWN
State:PA
ZIP:19539-0038
Country:US
Info Phone Num:215-682-7171
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:04503
=== Contractor Identification ===
Company Name:ATLAS MINERALS & CHEMICAL INC
Address:FARMINGTON ROAD
Box:City:MERTZTOWN
State:PA
ZIP:19539-0038
Country:US
Phone:215-682-7171
CAGE:04503

=============  Composition/Information on Ingredients  =============

Ingred Name:BISPHENOL A DIGLYCIDL ETHER RESIN; (BISPHENOL-A EPOXY
    RESIN)
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: 65-85%

Ingred Name:PROPANE,1,2-EPOXY-3-(O-TOLYOXY)-; (O-CRESYL GLYCIDYL ETHER)
CAS:2210-79-9
RTECS #:TZ3700000
Fraction by Wt: 15-35%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CONTACT MAY CAUSE
    IRRITATION. SKIN: CONTACT MAY CAUSE IRRITATION. LONG TERM/REPEATED
    CONTACT MAY CAUSE SENSITIZATION. INHAL: INHALATION RESULTS IN
    IRRITATION TO THE RESPIRATORY TRACT & MU COUS TISSUES. CHRONIC
    EFFECTS OF OVEREXPOSURE: IRRITATION, SENSITIZATION, DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA AND SKIN
    CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH CLEAR WATER FOR AT LEAST 15 MINUTES. GET
    MEDICAL ATTENTION IMMEDIATELY. SKIN: WASH CONTACT AREA WITH MILD
    SOAP AND CLEAN WATER. IF IRRITATION/SWELLING DEVELOP, GET MEDICAL
    ATTENTION.	INHAL: REMOVE TO FRESH AIR. IF BREATHING STOPS, BEGIN
    ARTIFICIAL RESPIRATION. GET MEDICAL HELP. INGEST: HAVE VICTIM DRINK
    LARGE VOLUMES OF WATER TO DILUTE. DO NOT INDUCE VOMIT. GET MED
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:262F,128C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER MAY BE INEFTIVE.IF A LG AMT IS INVOLVED, EVACUATE AREA &
    FIGHT FIRE FROM A SAFE DIST. COOL (SUPP DATA)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE ABSORBENT MATERIAL SUCH AS CLAY, SAND &
    DIATOMACEOUS EARTH TO CLEAN UP SPILLS, AND PLACE IN CONTAINERS FOR
    DISPOSAL. FOR LARGE SPILLS, DIKE AREA OF SPILL AND PUMP LIQUID INTO
    HOLDING TANK. FLUSH A REA W/WATER. KEEP OUT OF WATER SUPPLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
    CONTRS CLSD WHEN NOT IN USE. STORE UPRIGHT, AWAY FROM
    HEAT/SPARKS/FIRE. AVOID CONT W/EYES/SKIN(OR CLTHG).
Other Precautions:REMOVE CONTAMD CLOTHES & DO NOT REWEAR UNTIL
    THOROUGHLY CLEANED. DISCARD CONTAMINATED SHOES. AVOID BRTHG
    VAPS/MIST. USE W/ADEQUATE VENTILATION. DO NOT TAKE INTERNALLY, FOR
    INDUSTRIAL USE ONLY. KEEP OU T OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR MASK IF TLV IS
    EXCEEDED/USED IN CONFINED AREA.
Ventilation:LOCAL: PROVIDE VENT ADEQ TO KEEP EXPOSURE BELOW TLV & TO
    REMOVE ANY ODORS & FUMES. MECH: ACCEPTABLE.
Protective Gloves:PLASTIC/RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER, EYE BATH, & PROTECTIVE
    CLOTHING. APPLY PROTECTIVE SKIN CREAM TO EXPOSED AREAS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: SURROUNDING AREA W/WATER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>250F,>121C
Vapor Pres:LOW
Vapor Density:HVR/AIR
Spec Gravity:1.1-1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER COLOR LIQUID WITH CHARACTERISTIC ODOR.
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS, BASES, AMINES AND MERCAPTANS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ALDEHYDES, CARBON MONOXIDE &/OR CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:STRONG ACIDS, AMINES AND BASES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH APPLICABLE LOCAL,
    STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.